基礎信息Product information

產品名稱：metkon ECOPRESS-50自動熱鑲樣機

產品型號：

更新時間：2024-01-30

產品簡介：

metkon ECOPRESS-50自動熱鑲樣機
metkon ECOPRESS-100 全自動可編程熱鑲樣機
ECOPRESS-200 全自動可編程雙筒熱鑲樣機

產品特性Product characteristics

metkon鑲樣系統
metkon ECOPRESS-50自動熱鑲樣機
功率：1250W
溫度范圍：0-200℃
zui大液壓壓力：300bar
數顯，液壓自動鑲樣，自動水冷卻
鑲樣模尺寸Φ25-50，更換方便，可同時鑲樣2個
標配包括3種不同的熱鑲耗材，每種1公斤，共3公斤
metkon ECOPRESS-50自動熱鑲樣機描述Automatic Mounting Press with one cylinder, Fully automatic operation with microprocessor controls,  electro hydraulic pressure (requires no air), with touch pad front panel controls and digital display of; heating time, moulding temperature, cooling temperature, ram up/down,  auto/manual cooling, cycle start/stop,  last parameter settings retained in the memory, with direct reading pressure gage, moulding pressure upto 300 bar, temperature upto 2000C, operation time upto 59:99   minutes, short cycle time,  thermostatically   controlled  heating  power of 1250W, automatic cooling cycle,  selectable mould sizes   from 25 mm to 50 mm, audible warning  signal, ready for operation. Mould assemblies are ordered seperay.
Includes a standard set of mounting consumables composed of 3 different hot mounting compounds; 1 kg of each and a total of 3 kg.  

技術規格
Model    ECOPRESS 50
Order Code    25 04
Number of moulds    1
Max Pressure, (bar)    300
Max. Temprature, ( 0C )    200
Heating Power, (W)    1250
Water cooling    Yes
Operation    Automatic / Electrohydraulic
Display    Digital Display
Mould Assembly, (mm)    25-50

Mould Assemblies 
26 01-02    Mould assembly, 1" with intermediate ram
26 02-02    Mould assembly, 1 1/4" with intermediate ram
26 03-02    Mould assembly, 1 1/2" with intermediate ram
26 07-02    Mould assembly, 2" with intermediate ram
26 04-02    Mould assembly, 25 mm with intermediate ram
26 05-02    Mould assembly, 30 mm with intermediate ram
26 06-02    Mould assembly, 40 mm with intermediate ram
26 08-02    Mould assembly, 50 mm with intermediate ram
Accessories for ECOPRESS
GR 1363    Recirculating Coolant System, 40 lt. stainless steel cooling tank
GR 0937    Özel alt kabin, ECOPRESS için

耗材
Code    Order Code    Description
BAK-B    29-001    Black Phenolic Powder,1 kg.
BAK-B    29-001/10    Black Phenolic Powder,10 kg.
BAK-R    29-002    Red Phenolic Powder, 1 kg.
BAK-R    29-002/10    Red Phenolic Powder, 10 kg.
BAK-S    29-003    Light Brown Phenolic powder , 1 kg
BAK-S    29-003/10    Light Brown Phenolic powder , 10 kg
NET    29-010    Transparent Acrylic Powder, 1 kg.
EPO    29-011    Epoxy, Hard 1 kg.
DAP    29-012    Diallyphtalat, 1 kg.
CON    29-013    Conductive bakelite powder, 0,5 kg
SMOOTH    29-099    Mould Release Spray Can, 400 ml.

metkon ECOPRESS-100 全自動可編程熱鑲樣機
溫度范圍：0-200℃
zui大液壓壓力：300bar
可編程控制HMI觸摸屏，可預設并存儲多達25個程序
Programmable Automatic Mounting Press with one cylinder 7 inch HMI touch screen control, with Siemens PLC control unit, programmable with coloured LCD display, program based mounting sequences, electro hydraulic pressure (requires no air), pressure upto 300 bar, temperature upto 200 0C, operation time upto 59:99 minutes, short cycle time,  thermostatically controlled heating power of 1250W, automatic cooling cycle with three modes of cooling rates(standard cooling,slow cooling and based on time), programmable preheating and preloading, selectable mould sizes from 25 mm to 50 mm, audible warning  signal, ready for operation. 230 V, 1-phase, 50 Hz.
Mould assemblies are ordered seperay.
Includes a standard set of mounting consumables composed of
3 different hot mounting compounds; 1 kg of each and a total of 3 kg. 

Model    ECOPRESS 100
Order Code    25 07
Number of moulds    1
Max Pressure, (bar)    300
Max. Temprature, ( 0C )    200
Heating Power, (W)    1250
Water cooling    Yes
Operation    Automatic / Electrohydraulic
Display    7 inch HMI touch screen LCD
Mould Assembly, (mm)    25-50

ECOPRESS-200 全自動可編程雙筒熱鑲樣機
功率：1250W×2
溫度范圍：0-200℃
液壓自動鑲樣，自動水冷卻
可編程控制HMI觸摸屏，可預設并存儲多達25個程序
鑲樣模尺寸Φ25-50，更換方便，雙筒可同時使用，每次zui多鑲樣4個
標配包括3種不同的熱鑲耗材，每種1公斤，共3公斤
Programmable Automatic Mounting Press with two cylinders, 7 HMI touch screen control, with Siemens PLC control unit,  programmable with coloured LCD display, program based mounting sequences,  electro hydraulic pressure (requires no air), pressure upto 300 bar,  temperature  upto 200 0C, operation time upto 59:99   minutes, short cycle time, thermostatically controlled  heating  power of 2X1250W, automatic cooling cycle with three modes  of cooling rates( standard cooling, slow cooling and based on time),  programmable preheating and preloading, selectable mould sizes from  25 mm to 50 mm, audible  warning  signal, ready for operation. Mould assemblies are ordered seperay.
Includes a standard set of mounting consumables composed of 3 different hot mounting compounds; 1 kg of each and a total of 3 kg.  

Model    ECOPRESS 200
Order Code    25 08
Number of moulds    2
Max Pressure, (bar)    300
Max. Temprature, ( 0C )    200
Heating Power, (W)    2 x 1250
Water cooling    Yes
Operation    Automatic / Electrohydraulic
Display    7 HMI touch screen LCD
Mould Assembly, (mm)    25-50